Skip to content
-
-
- The 3/8” Gag allows two 3/8” (10mm) rods to be joined and positioned anywhere in 360 degrees. One 3/8” pass-thru receptacle is open so you can attach the 3/8” Gag at any point along a rod. The 3/8” Gag works perfectly for adding reinforcement components to a rig.
- Read more
-
-
- The Mini rigging rod set consists of different length rods, connecting long nuts and finger nuts. The rods which is made of a high grade aluminum are all threaded with 3/8” threads which makes possible to connect with most other grip equipment. Multiple rods can be used to create larger structures for rigging small cameras, lights, and a variety of…
- Read more
-
-
- The Quick Mount system (patent protected) features magnetic grip and instant thread alignment, making setting and positioning each component fast and easy with one hand. Built in rosettes on the mount and receiver will prevent unintended rotation. The 3/8”-16 Thread-on Quick Mount Receiver allows you to attach a Quick Mount Receiver onto any equipment that has a 3/8”-16 male thread. Always…
- Read more
-
-
- The 5/8” Gag Closed allows one 5/8” (16mm) rod to be joined and positioned anywhere in 360 degrees with either a 5/8” (16mm) rod or a 3/8” (10mm) rod. The 5/8” Gag Closed works perfectly for adding reinforcement components to a rigging structure. The option to convert from 5/8” (16mm) rod to 3/8” (10mm) rod gives you added flexibility for your rigging…
- Read more
-
-
- The 5/8” Gag Open allows for two 5/8” (16mm) rods to be joined and positioned anywhere in 360 degrees. One 5/8” (16mm) pass-thru receptacle is open so that you can attach it at any point along a 5/8” (16mm) rod. The 5/8” Gag Open works perfectly for adding reinforcement components to a rigging structure.
- Read more
-
-
- The Dual Knob Gag enables independently tightening and clamping of either side of the gag. It features a larger sized cup and ring then the other 9.Solutions gags which makes it ideal to be used as a regular Gobo/grip head.
- Read more
-
-
- The 6″ Suction Cup is fitted with an aluminum “cheese block” which is tapped with 3/8″-16 and 1/4″-20 holes throughout the top and side surfaces. The tapped holes are spaced with 1″ centers and comes included with 3 x 3/8″-16 to 1/4″-20 bushings. The cup pads are made from durable and flexible UV resistant rubber. The suction pump is made…
- Read more
-
-
- The El-Bo Arm is the fundamental design behind a series of incredibly strong articulating arms that can be used to hold lights, cameras, monitors, musical instruments, tablets, and more. The El-Bo Arm has an elegant locking-mechanism that makes it possible to operate with one hand. The compression handle locking-mechanism makes repositioning the arm quick and easy. The El-Bo Angled Arm…
- Read more
-
-
- The Barracuda Clamp is the real super clamp that delivers more versatility and innovation than any other clamp on the market. Whether round, square, or flat, the Barracuda Clamp will open wider and bite with more force than the competition. Its unique mouth design allows it to clamp onto different shaped objects without any additional pieces, and the clamping pressure is spread more…
- Read more
-
-
- The Box Corner is a quick way to make 50mm tube frames which can be used for structures such as soft box frames. The system can easily be integrated with standard truss components that also uses the 50mm tubes. Corners can furthermore be used along the side of a tube for additional bracing of a structure. The corners includes setscrews…
- Read more
-
-
- The C-Pan Arm II is a very unique camera guide contraption that mechanically can move a camera in a variety of different paths; straight pan, outward curve, inward curve, horizontally, vertically or at a sloped angle or even forward or backward moves. The camera is always set to move with whatever move the arm makes i.e.: if the arm moves…
- Read more
-
-
- The multi purpose 9.Solutions Cheese plate differentiates itself from most other cheese plates by offering the possibility to build your rigging out from its side tapped mounting blocks. Each of its three corner positioned blocks are tapped with 3/8”-16 side and bottom holes. It also features an elongated 10x36mm center slot for accurate positioning of ball heads. All 10mm through plate holes and four…
- Read more
-
-
- Due to its spring loaded clamping, this cold shoe clamp enables one to one-handedly mount shoe fitted equipment very easily. Its finger screw serves both as a push knob for opening the clamp and for tightening down the clamping securely. It fits the standard shoe sizes of 18, 20 and 22mm. The Cold Shoe Clamp is tapped with 1/4”-20 and…
- Read more
-
-
- A 50mm tube coupler with fast action locking receivers for Junior and Baby pins. The pass-through receivers features a dead bolt locking mechanism which rapidly can lock a pin in position. A further tightening knob secures the pins rotation and acts as a double holding safety. A tethered lynch pin is included for triple safety of the Junior pin.
- Read more
-
-
- 1) High user-friendliness, quick extension and pull-back of legs. 2) Built-in standard 75mm triopd bowl base, convertible to standard 3/8″ screw with the uniquely-desigened adaptor plate (included). 3) lighweight and highly portable (less than 3kg), heavy-duty on payload (up to 20kg).
- Read more
-
-
- The El-Bo Arm is the fundamental design behind a series of incredibly strong articulating arms that can be used to hold lights, cameras, monitors, musical instruments, tablets, and more. The El-Bo Arm has an elegant knee-locking mechanism that makes it possible to operate with one hand. The mechanism makes repositioning the arm quick and easy. The Double El-Bo Arm allows…
- Read more
-
-
- The Double Joint Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8” pin with a 3/8”-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any angle.
- Read more
-
-
- The Double Joint Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8” pin with a 3/8”-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any angle.
- Read more
-
-
- The Double Joint Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8” pin with a 3/8”-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any angle.
- Read more
-
-
- The Double Joint Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism. Each ball joint has a 5/8” pin with a 3/8”-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any angle.
- Read more
-
-
- The El-Bo Arm is the fundamental design behind a series of incredibly strong articulating arms that can be used to hold lights, cameras, monitors, musical instruments, tablets, and more. The El-Bo Arm has an elegant locking-mechanism that makes it possible to operate with one hand. The compression handle locking-mechanism makes repositioning the arm quick and easy. The El-Bo Arm is…
- Read more
-
-
- The Ex-sus Pole (Extension Suspension Pole) is a telescoping pole used to mount lights, cameras, and other equipment from a grid, pipe, or mounting point on the ceiling. The telescoping design allows the height of your equipment to be adjusted quickly and easily while also freeing-up valuable floorspace. The top of Ex-sus Pole has a 3/8”-16 male thread so that…
- Read more
-
-
- The Grip Joint is a great tool to join different sized rods into a rigid structure. It has one 1/4”-20 and three 3/8”-16 female threads, and it is fitted with a revolving 3/8” and 5/8” pass-thru receptacle. The Grip Joint can also be used to mount lights, cameras, or other equipment along the length of a rod.
- Read more
-
-
- The Heavy Duty Python Clamp with Stud features a 5/8″ baby pin for mounting standard grip and lighting equipment. The bottom of the pin is tapped with a 3/8″-16 female thread so equipment can be mounted directly to it. It also features a heavy duty T-Handle and a high grade 420 stainless steel threaded rod for added utility and durability.
- Read more
