MISCELLANEOUS ACCESSORIES Archives - 9.Solutions Canada

Cheese Plate

9Solutions — Fri, 21 Feb 2025 18:08:59 +0000

The multi purpose 9.Solutions Cheese plate differentiates itself from most other cheese plates by offering the possibility to build your rigging out from its side tapped mounting blocks.

Each of its three corner positioned blocks are tapped with 3/8”-16 side and bottom holes.

It also features an elongated 10x36mm center slot for accurate positioning of ball heads.

All 10mm through plate holes and four of the 1/4”-20 tapped holes are spaced with the industry standard 1 inch center distances.

The three included 3/8” rod clamps can be repositioned in any 3/8” tapped hole.

The post Cheese Plate appeared first on 9.Solutions Canada.

Reversal Adaptor

9Solutions — Fri, 21 Feb 2025 18:03:03 +0000

The Reversal Adaptor turns any 3/8”-16 tapped hole into a male 1/4“-20 thread or vice-versa. It is also tapped with both 3/8”-16 and 1/4”-20 holes perpendicular to the screws so it can also be used to angle a mounting point.

It can for example be used to turn the end of a 9.Solutions 5/8” rod into a male 1/4”-20 thread. This enables you to mount 1/4”-20 tapped equipment on the end of the rods and use them together with any of the industry standard 5/8” equipment.

The post Reversal Adaptor appeared first on 9.Solutions Canada.

Snap-In Socket V2.0

9Solutions — Fri, 21 Feb 2025 17:56:29 +0000

The snap-in socket features a handsfree snap-lock mechanism which allows you to place or hang 5/8” spigot or stud fitted equipment securely. The handsfree locking of the socket frees your hand to hold and guide the equipment that is being mounted.

The socket includes a 3/8”-16 captive screw for it to be mounted onto any 3/8”-16 tapped mounts. The screw can also be removed if mounted onto a male thread.

The post Snap-In Socket V2.0 appeared first on 9.Solutions Canada.

Cold Shoe Clamp

9Solutions — Fri, 21 Feb 2025 17:52:04 +0000

Due to its spring loaded clamping, this cold shoe clamp enables one to one-handedly mount shoe fitted equipment very easily. Its finger screw serves both as a push knob for opening the clamp and for tightening down the clamping securely.

It fits the standard shoe sizes of 18, 20 and 22mm.

The Cold Shoe Clamp is tapped with 1/4”-20 and 3/8”-16 holes on the back side.

The post Cold Shoe Clamp appeared first on 9.Solutions Canada.

LAPTOP HOLDER

9Solutions — Fri, 21 Feb 2025 17:46:19 +0000

The 9.Solutions Laptop Holder is a very durable and multi positionable platform to securely hold common sized Laptops and tablets.

It utilizes a very rugged and secure tilting hinge for positioning the platform at any angle.
It has two 5/8” receptacles that enables it to be mounted on vertical or horizontal 5’8” pins.

The two mushroom shaped knobs on the platform that can be positioned to hold any sized laptop or tablet.

The tilting mount is positioned at the top of the holder’s platform to always insure that the center of gravity is located below the mounting point. This insures that the holder won’t accidentally rotate off to one side when its mounted onto a horizontally positioned 5/8” pin.

The main components are all made from high grade anodized aluminium to insure secure and long lasting usage.

The post LAPTOP HOLDER appeared first on 9.Solutions Canada.

Phone Grip

9Solutions — Thu, 20 Feb 2025 02:34:22 +0000

The Phone Grip is a versatile tool that allows users to securely mount their smartphones to accommodate a variety of use scenarios. Featuring multiple 1/4” and 3/8” attachment points, the Phone Grip is designed to be used with a wide range of photo and video equipment.

The post Phone Grip appeared first on 9.Solutions Canada.

Tablet Holder

9Solutions — Thu, 20 Feb 2025 02:31:40 +0000

The Tablet Holder is an ideal support tool for the media production environment with its multiple 1/4”-20 and 3/8” -16 tapped mounting points on all sides which enables it to be mounted from any of its sides or allows peripheral equipment to be placed around it. It features a spring loaded jaw which enables easy one hand placement and retrieval of the tablet with or without a protective case.
Its easy adjustment to fit most sized tablets on the market also makes it very adaptive to frequent changing tablet sizes in a production environment. The adjustment knob can be tighten down to add additional security if the tablet is used in vibrating situations like for example in a car. Its lined with a protective non slip rubber which helps to hold it securely in its place.

The post Tablet Holder appeared first on 9.Solutions Canada.

Tilt Stud Adaptor

9Solutions — Thu, 20 Feb 2025 02:21:28 +0000

The Tilt Adaptor is an articulating link featuring a friction locking disc that can securely and accurately set the angle between its built in 5/8″ pin and its corresponding 5/8″ receptacle via its adjustable tension lever. This allows users to quickly and precisely change the position of any mounted equipment. The ergonomic lever makes it easy to lock down the friction disc in confined spaces while the twist resistant 5/8″ pin prevents rotation when locked down. The Tilt Adaptor works great in combination with 9.Solutions’ VESA Mounts (sold separately) to tilt and position monitors.

The post Tilt Stud Adaptor appeared first on 9.Solutions Canada.

VESA mount Large (200mm)

9Solutions — Tue, 18 Feb 2025 21:19:09 +0000

The Large VESA to 5/8” Receptacle allows small, medium, and large VESA
compatible monitors to be mounted on standard grip equipment via its 5/8”
receptacle or 1/4”-20 and 3/8”-16 female threaded tap-ins. It has two 5/8”
receptacles allowing you to mount monitors from below or from the back.
The Large VESA to 5/8” Receptacle works well with a variety of industry standard
light stands, as well as the 9.Solutions El-Bo Arm (sold separately) that allows
you to easily reposition the monitor.

It can accommodate monitors with the following mounting pattern 75×75,100×100,
100×200, and 200x200mm.

The post VESA mount Large (200mm) appeared first on 9.Solutions Canada.

VESA to 5/8″ Receptacle

9Solutions — Tue, 18 Feb 2025 21:15:48 +0000

The VESA to 5/8” Receptacle allows small to medium sized VESA compatible monitors to be mounted on standard grip equipment via its 5/8” receptacle or 1/4”-20 and 3/8”-16 female threaded tap-ins. It has two 5/8” receptacles allowing you to mount monitors from below on stands or from the back via a horizontally mounted pin or articulating arm.

The VESA mount works well with the 9.Solutions’ El-Bo Arm, allowing you to easily reposition the monitor.

The post VESA to 5/8″ Receptacle appeared first on 9.Solutions Canada.